Centrifugal Jet Pumps are subject to mandatory BIS ISI certification under the Pumps (Quality Control) Order, 2026. From 6 mo after publication of the QCO in the e-Gazette, these products cannot be lawfully manufactured for sale, imported, or distributed in India without a valid BIS ISI licence under IS 12225:1997. Non-compliance attracts penalties under the BIS Act, 2016 — product seizure, fines, and prosecution.
This guide covers the applicable Indian Standard, key technical and safety requirements, the step-by-step certification process, documentary requirements, and the most common compliance pitfalls for manufacturers and importers.
📜 Applicable Indian Standard
- IS 12225:1997 — Centrifugal Jet Pumps (primary standard)
- Aligned with the corresponding IEC / ISO standard for technical performance and safety
- Latest amendments notified by BIS apply automatically
📌 Jet pumps lift water from deeper sources than conventional monoblocks. The QCO enforces minimum head, efficiency, and endurance — preventing failures that disrupt household and small-business water supply.
🔬 Key Quality Requirements Under IS 12225:1997
BIS-approved laboratories evaluate the following during type testing:
Hydraulic Performance
Total head, discharge, and efficiency at rated operating point. Performance curve compliance with IS 12225 charts.
Jet & Venturi Assembly
Jet nozzle and venturi (ejector) testing for cavitation resistance and long-term wear. Material certification for jet assembly.
Electrical Safety
Motor insulation, leakage current, and earthing verification. Capacitor and starter performance for single-phase units.
Endurance & Sealing
Mechanical seal endurance, bearing life, and continuous-duty testing. Maximum dry-run tolerance specified.
Products covered under IS 12225:1997:
- Shallow well jet pumps — borewell depth under 8 m
- Deep well jet pumps — twin-pipe systems up to 30 m
- Domestic pressure-boosting jet pumps
- Garden and landscape jet pumps
📋 Step-by-Step BIS ISI Certification Process
- Model IdentificationList every kW rating, voltage, and jet-assembly variant. Each unique construction may need separate sample testing.
- Application FilingSubmit online application on manak.bis.gov.in. Indian manufacturers via Product Certification Scheme; foreign manufacturers via FMCS.
- Sample TestingSubmit complete pump-and-motor sets to a BIS-recognised pump testing laboratory. Hydraulic, electrical, and endurance tests: approximately 4–6 weeks.
- Factory InspectionBIS officers inspect pump and motor manufacturing, in-house testing, and quality records.
- Licence GrantBIS issues the ISI Mark licence. ISI Mark plus licence number is applied on the pump nameplate.
- Surveillance & RenewalPeriodic BIS market sample testing, factory audits, and annual marking fees keep the licence active.
📄 Documents Required
- Company incorporation / registration certificate
- Product list with kW ratings, voltage, and jet assembly types
- Pump and motor engineering drawings and BOM
- Process flow chart for casting, machining, and assembly
- Motor winding details and capacitor specifications
- Quality Manual / ISO 9001 certificate (if available)
- AIR appointment letter (for foreign manufacturers)
- Existing test reports from BIS-recognised labs (if any)
⚠ Common Compliance Pitfalls
Common issues include head shortfall against rated curves, premature jet-assembly wear, motor winding failures under continuous duty, and excessive starting current on single-phase units.
🏭 Special Considerations for Importers
Jet pumps are widely imported for India's domestic and commercial water-supply market. Each kW rating and jet assembly variant requires its own BIS ISI certification. Importers must hold valid BIS documentation before customs clearance.
Get BIS Certified — We Handle Everything
Global Approbation manages end-to-end BIS ISI / FMCS registration for Centrifugal Jet Pumps — from documentation to licence grant. Enforcement begins 6 mo from QCO notification.
BIS ISI / FMCS Services Talk to Our Team