BIS Certification for Electric Noodle Makers in India products are subject to mandatory BIS Compulsory Registration Scheme (CRS) requirements in India. Every manufacturer and importer must obtain a valid BIS CRS registration for each model before the product can be manufactured, imported, or sold in the Indian market. Non-compliance attracts penalties including product seizure, market withdrawal, and prosecution under the BIS Act 2016.
This guide covers the applicable Indian Standards, mandatory safety testing requirements, the step-by-step CRS registration process, documentary requirements, and the most critical compliance pitfalls for this product category in 2026.
📜 Applicable Indian Standards
The following Indian Standards apply to this product category under the BIS CRS framework:
- IS/IEC 60335-2-14 — Particular requirements for kitchen machines (covers electric noodle makers and pasta machines)
- IS/IEC 60335-1 — General requirements for safety of household and similar electrical appliances
- IS 13252 (Part 1) — Indian adaptation of IEC 60335-1
📌 Electric noodle makers with extrusion dies present a finger-entrapment hazard at both the dough-feed inlet and the noodle-extrusion outlet. BIS testing evaluates accessibility of the auger screw from both openings using standard test probes, and verifies that the motor protection system stops the auger safely when dough jams the extrusion die.
🔬 Mandatory Safety Tests
BIS-approved laboratories evaluate the following key areas during safety testing for this product category:
Electrical Safety
Insulation resistance, dielectric strength, leakage current, earth continuity, and motor protection.
Auger and Die Access Prevention
Test probe access to the rotating auger screw from the dough-feed hopper and from the die extrusion outlet; aperture geometry verification.
Motor and Drive
Motor overload and thermal protection under dough-jam and die-blockage conditions; auger drive coupling integrity.
Mechanical Safety
Housing and die assembly stability under maximum dough extrusion force; die locking mechanism reliability during operation.
📋 Step-by-Step BIS CRS Registration Process
- Standard ConfirmationConfirm the product maps to IS/IEC 60335-2-14. Noodle makers with integrated kneading and cutting functions must include all sub-systems in the test scope.
- Appoint AIRForeign manufacturers must appoint an AIR in India before filing the BIS CRS application.
- Sample TestingSubmit representative noodle maker units with full die set to a BIS-approved lab. Testing typically takes 4-6 weeks.
- Online ApplicationSubmit Form VI, test report, factory documents, photographs, trademark certificate, and AIR letter on BIS Manak Online.
- BIS Query ResolutionCommon queries involve auger access probe measurement data, die jam motor protection evidence, and die locking mechanism test documentation.
- R-Number GrantBIS issues the R-number upon approval. Mark on the appliance, packaging, and user manual.
- RenewalValid for 2 years. Changes to auger, die set, or motor require re-testing.
📄 Documents Required
- Completed BIS Form VI and declaration of conformity
- Test report as per IS/IEC 60335-2-14 and IS 13252 (Part 1) from BIS-approved laboratory
- Factory registration and address proof
- Trademark registration certificate
- AIR appointment letter (for foreign manufacturers)
- Product photographs with compliance label placement
- Technical specification sheet (rated voltage, motor power, extrusion capacity, die specifications)
- User manual in English and/or Hindi
⚠ Common Rejection Reasons
Common rejection causes include the standard test probe accessing the auger screw through the dough-feed hopper aperture, the die locking mechanism releasing under the maximum extrusion force during the fault condition test, motor overload protection failing to actuate within the specified time under the die-jam blocked-auger condition, and trademark name discrepancies between the trademark certificate and the product label.
🏭 Special Considerations for Importers
Electric noodle makers are a growing import category driven by India's interest in home cooking of Asian cuisine. Importers must ensure valid BIS CRS documentation for each model and die-set configuration before customs clearance.
Electric Noodle Maker BIS Certification Partner
Global Approbation handles BIS CRS registration for electric noodle makers — from IS/IEC 60335-2-14 testing to R-number grant.
BIS CRS Services Talk to Our Team