
India de-licensed the lower 6 GHz band (5945–6425 MHz) for Wi-Fi in January 2026. Routers, laptops, phones and other Wi-Fi 6E/7 devices can now use it — but only once their WPC ETA covers the band. This guide covers the bands involved, the RF test standards, the other Indian approvals that usually apply, and the mistakes that most often delay approval. For the full service, see our WPC ETA approval services.
Quick answer: Yes. GSR 47(E), dated 20 January 2026, de-licensed 5945–6425 MHz, and WPC has enabled the band on SARAL Sanchar for ETA by self-declaration. The fee is Rs 10,000 per application and the ETA remains valid unless revoked.
📡 Do 6 GHz Wi-Fi 6E & Wi-Fi 7 Devices Need WPC Approval?
Yes. GSR 47(E), dated 20 January 2026, de-licensed 5945–6425 MHz, and WPC has enabled the band on SARAL Sanchar for ETA by self-declaration. Products already holding an ETA for 2.4/5 GHz must be re-assessed before 6 GHz is switched on for India.
📶 Radio Bands & Technologies
Wi-Fi 6 GHz
5945–6425 MHz, de-licensed by GSR 47(E) of 20 January 2026 and now selectable on SARAL Sanchar. Tested to ETSI EN 303 687.
Wi-Fi 7 multi-link operation
Wi-Fi 7 devices can transmit on 2.4, 5 and 6 GHz at once. Each band must be tested and declared.
Wi-Fi 5 GHz
802.11a/n/ac/ax in the de-licensed 5 GHz sub-bands. Tested to ETSI EN 301 893 (and EN 300 440 / EN 302 502 where the 5.8 GHz band is used).
Wi-Fi 2.4 GHz
802.11b/g/n/ax in 2400–2483.5 MHz. Tested to ETSI EN 300 328.
🔬 RF Test Standards & Reports
WPC needs an RF test report for every transmitter in the product. Reports are typically prepared against the harmonised ETSI standards below, at an ISO/IEC 17025-accredited lab, with the firmware set to India’s bands and power limits.
- ETSI EN 303 687 — 6 GHz RLAN
- ETSI EN 301 893 — 5 GHz
- ETSI EN 300 328 — 2.4 GHz
🧾 Other Approvals for 6 GHz Wi-Fi 6E & Wi-Fi 7 Devices
WPC ETA covers only the radio. Depending on the product, these approvals usually run alongside it:
- Operating conditions in GSR 47(E): The notification sets power and usage conditions for the 6 GHz band. Firmware must enforce India’s limits; we review the configuration before testing.
- Product-category approvals: Routers may need TEC MTCTE; laptops, phones and tablets need BIS CRS.
🛠️ Step-by-Step WPC ETA Process
- Map every radioList each transmitter in the 6 ghz wi-fi 6e & wi-fi 7 devices with its band, technology and maximum output power.
- Check India settingsConfirm firmware limits channels and power to the Indian de-licensed bands.
- RF testingTest each radio to the applicable ETSI standard at an ISO/IEC 17025-accredited lab, or check that existing reports cover the Indian settings.
- Register on SARAL SancharCreate the applicant profile (Indian entity or authorised Indian representative, with GST, PAN and IEC details).
- File the self-declarationUpload the RF test report, technical documents and authorisation, and pay the Rs 10,000 fee.
- Download the ETAUnder DoT’s September 2024 OM, the ETA can be downloaded once the application is successfully submitted.
📄 Documents Required
- RF test report covering every radio in the product
- Technical specifications: frequency bands, technology and maximum output power for each radio
- User manual and product photographs or label artwork showing the model number
- Authorisation from the manufacturer, where an Indian representative applies
- Applicant registration details on SARAL Sanchar (GST, PAN, IEC)
⚠️ Common Pitfalls for 6 GHz Wi-Fi 6E & Wi-Fi 7 Devices
- Enabling the US 6 GHz range (up to 7125 MHz) in Indian firmware — India de-licensed only 5945–6425 MHz.
- Assuming an existing 2.4/5 GHz ETA covers 6 GHz.
- Test report from another market that does not show the Indian band edges and power settings.
- Shipping devices with 6 GHz locked off, then enabling it by over-the-air update without updating the ETA.
❓ Frequently Asked Questions
When did India allow 6 GHz Wi-Fi?
GSR 47(E), dated 20 January 2026, de-licensed 5945–6425 MHz.
Can I enable 6 GHz by software update on devices already sold?
Only once the ETA covers the 6 GHz band and the firmware respects India’s band limits.
Is the full 5925–7125 MHz band allowed?
No. India de-licensed only 5945–6425 MHz.
How much does WPC ETA cost and how long is it valid?
The SARAL Sanchar fee is Rs 10,000 per application, and DoT states that an ETA is valid for life unless revoked by the WPC Wing. Testing costs are separate.
How long does WPC ETA by self-declaration take?
Once the RF test report is ready, the application is filed on SARAL Sanchar and the ETA can be downloaded after successful submission and fee payment. Most of the time goes into testing.
WPC ETA for 6 GHz Wi-Fi 6E & Wi-Fi 7 Devices — Handled End to End
Global Approbation maps your radios, coordinates RF testing, files on SARAL Sanchar and manages the related BIS and DoT approvals, so your Wi-Fi 6E and Wi-Fi 7 devices using the 6 GHz band can clear customs without delay.
Talk to Our WPC Team WPC ETA Services