
Smartwatches and fitness bands combine Bluetooth with, in many models, Wi-Fi, NFC payments or LTE. Each radio has to be covered by the WPC ETA, and the watch also needs BIS CRS registration. This guide covers the bands involved, the RF test standards, the other Indian approvals that usually apply, and the mistakes that most often delay approval. For the full service, see our WPC ETA approval services.
Quick answer: Yes. DoT lists smart watches among the finished products that obtain ETA through self-declaration on SARAL Sanchar. The fee is Rs 10,000 per application and the ETA remains valid unless revoked.
📡 Do Smartwatches & Fitness Bands Need WPC Approval?
Yes. DoT lists smart watches among the finished products that obtain ETA through self-declaration on SARAL Sanchar. The application must declare every radio in the watch — Bluetooth, Wi-Fi, NFC and any cellular bands for LTE/eSIM variants.
📶 Radio Bands & Technologies
Bluetooth (2.4 GHz)
Classic Bluetooth and Bluetooth Low Energy operate in 2400–2483.5 MHz, a de-licensed band in India. Tested to ETSI EN 300 328.
Wi-Fi 2.4 GHz
802.11b/g/n/ax in 2400–2483.5 MHz. Tested to ETSI EN 300 328.
NFC (13.56 MHz)
Near-field payment and pairing coils. Tested to ETSI EN 300 330.
LTE / eSIM (cellular variants)
Cellular smartwatches transmit in licensed mobile bands. Tested to the ETSI EN 301 908 series; the cellular variant is a different model from the Bluetooth-only version.
🔬 RF Test Standards & Reports
WPC needs an RF test report for every transmitter in the product. Reports are typically prepared against the harmonised ETSI standards below, at an ISO/IEC 17025-accredited lab, with the firmware set to India’s bands and power limits.
- ETSI EN 300 328 — Bluetooth / 2.4 GHz Wi-Fi
- ETSI EN 300 330 — NFC
- ETSI EN 301 908 series — LTE (cellular variants only)
- EN 62479 / EN 50566 — RF exposure evidence, especially for cellular watches
🧾 Other Approvals for Smartwatches & Fitness Bands
WPC ETA covers only the radio. Depending on the product, these approvals usually run alongside it:
- BIS CRS for smart watches: Smart watches are a notified BIS CRS category under IS 13252 (Part 1). Registration is needed before import.
- BIS CRS for Li-ion cells and batteries: Rechargeable lithium cells and battery packs inside the product need their own BIS CRS registration (IS 16046) before import.
- BIS CRS for the charger/adapter: External power adapters supplied with the product are registered separately under BIS CRS (IS 13252 Part 1).
🛠️ Step-by-Step WPC ETA Process
- Map every radioList each transmitter in the smartwatches & fitness bands with its band, technology and maximum output power.
- Check India settingsConfirm firmware limits channels and power to the Indian de-licensed bands.
- RF testingTest each radio to the applicable ETSI standard at an ISO/IEC 17025-accredited lab, or check that existing reports cover the Indian settings.
- Register on SARAL SancharCreate the applicant profile (Indian entity or authorised Indian representative, with GST, PAN and IEC details).
- File the self-declarationUpload the RF test report, technical documents and authorisation, and pay the Rs 10,000 fee.
- Download the ETAUnder DoT’s September 2024 OM, the ETA can be downloaded once the application is successfully submitted.
📄 Documents Required
- RF test report covering every radio in the product
- Technical specifications: frequency bands, technology and maximum output power for each radio
- User manual and product photographs or label artwork showing the model number
- Authorisation from the manufacturer, where an Indian representative applies
- Applicant registration details on SARAL Sanchar (GST, PAN, IEC)
⚠️ Common Pitfalls for Smartwatches & Fitness Bands
- Bluetooth-only and LTE variants filed under one ETA.
- NFC payment coil left out of the RF report.
- Strap or case-size variants filed as separate models when they are electrically identical.
- Watch charger (cradle/adapter) without its own BIS CRS registration.
❓ Frequently Asked Questions
Does a fitness band without a screen still need WPC ETA?
Yes. Any band that syncs over Bluetooth is a radio transmitter and needs ETA.
Is an LTE smartwatch treated differently?
It still uses ETA, but the RF report must cover the cellular bands, and the LTE model is filed separately from the Bluetooth-only one.
Which comes first, BIS or WPC?
They run in parallel. Many brands start WPC testing first because it is quicker.
How much does WPC ETA cost and how long is it valid?
The SARAL Sanchar fee is Rs 10,000 per application, and DoT states that an ETA is valid for life unless revoked by the WPC Wing. Testing costs are separate.
How long does WPC ETA by self-declaration take?
Once the RF test report is ready, the application is filed on SARAL Sanchar and the ETA can be downloaded after successful submission and fee payment. Most of the time goes into testing.
WPC ETA for Smartwatches & Fitness Bands — Handled End to End
Global Approbation maps your radios, coordinates RF testing, files on SARAL Sanchar and manages the related BIS and DoT approvals, so your smartwatches and fitness bands can clear customs without delay.
Talk to Our WPC Team WPC ETA Services