WPC · Wireless Approval

WPC ETA Approval for TWS Earbuds & Bluetooth Headphones in India

TWS earbuds, neckbands and Bluetooth headphones need WPC Equipment Type Approval before import or sale — bands, RF test standards, related approvals, fees and pitfalls.

Published: November 2026 Reading Time: 5 min
WPC ETA approval for TWS Earbuds & Headphones in India — Global Approbation

True-wireless earbuds, neckbands and over-ear Bluetooth headphones are among the highest-volume imports into India. Each model needs WPC ETA, and most also need BIS CRS registration. This guide covers the bands involved, the RF test standards, the other Indian approvals that usually apply, and the mistakes that most often delay approval. For the full service, see our WPC ETA approval services.

Quick answer: Yes. Every earbud, neckband and headphone with Bluetooth transmits at 2.4 GHz and needs WPC ETA. The fee is Rs 10,000 per application and the ETA remains valid unless revoked.

📡 Do TWS Earbuds & Bluetooth Headphones Need WPC Approval?

Yes. Every earbud, neckband and headphone with Bluetooth transmits at 2.4 GHz and needs WPC ETA. Because these products use Bluetooth, the ETA is obtained by self-declaration on SARAL Sanchar. The charging case is usually covered as part of the same model.

Rs 10,000ETA Fee
Self-declarationETA Route
LifetimeValidity (unless revoked)

📶 Radio Bands & Technologies

Bluetooth (2.4 GHz)

Classic Bluetooth and Bluetooth Low Energy operate in 2400–2483.5 MHz, a de-licensed band in India. Tested to ETSI EN 300 328.

LE Audio / proprietary low-latency links

Gaming earbuds often add a 2.4 GHz USB dongle. The dongle is a separate transmitter and needs to be covered — either in the same ETA (if sold together) or its own.

🔬 RF Test Standards & Reports

WPC needs an RF test report for every transmitter in the product. Reports are typically prepared against the harmonised ETSI standards below, at an ISO/IEC 17025-accredited lab, with the firmware set to India’s bands and power limits.

🧾 Other Approvals for TWS Earbuds & Bluetooth Headphones

WPC ETA covers only the radio. Depending on the product, these approvals usually run alongside it:

🛠️ Step-by-Step WPC ETA Process

  1. Map every radioList each transmitter in the tws earbuds & bluetooth headphones with its band, technology and maximum output power.
  2. Check India settingsConfirm firmware limits channels and power to the Indian de-licensed bands.
  3. RF testingTest each radio to the applicable ETSI standard at an ISO/IEC 17025-accredited lab, or check that existing reports cover the Indian settings.
  4. Register on SARAL SancharCreate the applicant profile (Indian entity or authorised Indian representative, with GST, PAN and IEC details).
  5. File the self-declarationUpload the RF test report, technical documents and authorisation, and pay the Rs 10,000 fee.
  6. Download the ETAUnder DoT’s September 2024 OM, the ETA can be downloaded once the application is successfully submitted.

📄 Documents Required

Model numbers matter: the model numbers in the test report, label, manual and ETA application must match exactly. Mismatches are among the most common reasons for queries and customs holds.

⚠️ Common Pitfalls for TWS Earbuds & Bluetooth Headphones

❓ Frequently Asked Questions

Do earbuds need both BIS and WPC?

Usually yes. WPC ETA covers the radio; BIS CRS covers product safety. Both must be in place before sale.

Does the charging case need a separate approval?

No separate ETA if it has no radio. Its battery may still need BIS CRS registration as a Li-ion cell/pack.

Can one ETA cover several earbud models?

Only electrically identical models. Different chipsets, antennas or output power mean separate applications.

How much does WPC ETA cost and how long is it valid?

The SARAL Sanchar fee is Rs 10,000 per application, and DoT states that an ETA is valid for life unless revoked by the WPC Wing. Testing costs are separate.

How long does WPC ETA by self-declaration take?

Once the RF test report is ready, the application is filed on SARAL Sanchar and the ETA can be downloaded after successful submission and fee payment. Most of the time goes into testing.

WPC ETA for TWS Earbuds & Bluetooth Headphones — Handled End to End

Global Approbation maps your radios, coordinates RF testing, files on SARAL Sanchar and manages the related BIS and DoT approvals, so your TWS earbuds can clear customs without delay.

Talk to Our WPC Team WPC ETA Services