Clay masks, mud masks, charcoal masks and wash-off face packs are the deep-cleansing end of the mask shelf, and each must be registered with CDSCO under the Cosmetics Rules, 2020 before import. Registration is product-level and tied to the specific formulation, its variants and the factory.
These differ from sheet masks: there is no substrate, the product is the paste itself, so the mineral composition and its heavy-metal profile are what CDSCO reads.
📌 Under Rule 12(1) of the Cosmetics Rules, 2020, no Clay & Wash-off Masks may be imported into India unless the product is registered by the Central Licensing Authority. The application is Form COS-1 on the CDSCO SUGAM portal, and the approval is issued as an Import Registration Certificate in Form COS-2 — it must be in place before the first consignment lands.
📋 Is CDSCO Registration Mandatory for Clay & Wash-off Masks?
Yes. A clay or wash-off mask is a Fourth Schedule skin-care preparation and needs CDSCO registration before the first consignment. The absence of an Indian Standard changes the evidence base to the country-of-origin standard plus the Cosmetics Rules.
The application is filed by the overseas manufacturer or, in practice, its Authorised Indian Agent.
📘 The Indian Standard in Detail
No Ninth Schedule Indian Standard applies to a clay or wash-off mask, so it is assessed against the country-of-origin standard plus the Cosmetics Rules, 2020, with the CoA drawn against the manufacturer's finished-product specification — pH, appearance, preservative content and microbiological limits.
Because clays and mineral pigments are natural and can carry trace heavy metals, a heavy-metals report on the finished mask is important (lead, arsenic, mercury within the general limits). A water-based paste needs a robust preservative system, and any exfoliating acid or scrub particle is declared.
🗂️ The Core Document Set — Required for Every Application
Whatever the product, Form COS-1 carries the same core dossier. Getting this base right is what decides whether the file clears in one pass or comes back as a query letter; the product-specific documents in the next section sit on top of it.
- Covering letter — states the purpose (fresh registration, endorsement of a product, site or pack size, or re-registration), references any earlier certificate and points to the correlation charts.
- Authorisation from the manufacturer (First Schedule) — names the manufacturer, every manufacturing premises, the Authorised Indian Agent and each product, variant and pack size; signed jointly on every page, then notarised and apostilled (Hague states) or embassy-attested.
- Part-I of the Second Schedule — company and product particulars, chemical information and the nine statutory undertakings, completed afresh for each COS-1.
- Ingredient list with percentages — INCI nomenclature, percentage of each ingredient, signed by a competent person; must exclude anything listed in Annex A of IS 4707 (Part 2).
- Inner and outer labels — legible originals for the product and every variant, compliant with Chapter VI.
- Specification and method of testing — the finished-product specification and test method, signed and stamped.
- Finished-product Certificate of Analysis — a batch CoA against the applicable Ninth Schedule Indian Standard, or against country-of-origin standards where no Indian Standard exists.
- Manufacturing licence / marketing authorisation — an authenticated copy from the country-of-origin regulator, or a manufacturer's undertaking where no such regime exists.
- Free Sale Certificate (FSC) — original, from the National Regulatory Authority of the country of origin; if issued by a chamber of commerce, apostilled or embassy-attested, and the product list signed and stamped.
- Non-animal-testing declaration — that the products have not been tested on animals after 12 November 2014.
- Heavy-metal and hexachlorophene declaration — a test report for Pb, As, Hg and other heavy metals plus microbiological results, or a manufacturer's undertaking of compliance.
- GMP / ISO 22716 certificate — evidence of cosmetic Good Manufacturing Practice at the overseas site.
- Correlation chart — maps each product serial number in COS-1 against the FSC and the Authorisation; missing or inconsistent charts are among the most common causes of query letters.
- Bharatkosh fee receipt — acknowledgement of the fee paid under head of account 0210041040000-00-1.
- Duly signed Form COS-1 — original, with every detail matching the Authorisation and Second Schedule Part-I exactly.
➕ Extra Documents for Clay & Wash-off Masks
On top of the core dossier above, a clay-mask application needs:
- Certificate of Analysis against the country-of-origin specification — pH, appearance, preservative content and microbiological limits.
- Heavy-metals report on the finished mask (Pb, As, Hg within the general limits), given the natural clay/mineral base.
- Clay / mineral composition declaration (kaolin, bentonite, charcoal, etc.).
- Preservative-system declaration for the water-based paste.
- Country-of-origin standard and specification, since no Ninth Schedule Indian Standard applies.
- Declaration of any AHA/BHA or scrub particle where present.
⚗️ Composition & Safety Limits
Regardless of category, the finished cosmetic must respect the composition limits in the Cosmetics Rules, 2020. CDSCO checks these against the heavy-metal report or the manufacturer's undertaking:
- Arsenic (in permitted colours) — not more than 2 ppm, as arsenic trioxide.
- Lead (in permitted colours) — not more than 20 ppm, as lead.
- Other heavy metals (in permitted colours) — not more than 100 ppm as the total of the respective metals.
- Mercury — up to 70 ppm (0.007%) as a preservative in eye-area products only; unintentional mercury not to exceed 1 ppm in all other products.
- Hexachlorophene — prohibited, except in soaps up to 1% w/w with the prescribed caution.
- Lead and arsenic compounds as colourants — prohibited outright.
- Dyes, colours and pigments — only those specified in IS 4707 (Part 1) / IS 4707 (Part 2) and the Tenth Schedule.
Natural clays and mineral pigments can carry trace heavy metals, so the finished-mask heavy-metals report matters more here than for a synthetic formula. A water-based paste also needs a well-evidenced preservative system.
🏷️ Clay & Wash-off Masks Label Requirements
In addition to the general Chapter VI requirements, clay-mask labels are checked for these product-specific points:
- Directions for use, wear time and rinse-off instructions.
- Full ingredient list preceded by “INGREDIENTS”.
- Net content by weight.
- Any caution for sensitive skin or eye-area avoidance.
⚖️ Natural Clay and the Heavy-Metal Check
A clay or wash-off mask is firmly cosmetic; the classification question rarely arises. The real watch-point is the natural raw material: clays and mineral pigments can carry trace lead, arsenic and mercury, so the finished-mask heavy-metals report is what CDSCO scrutinises. A "detox" or "purifying" claim is cosmetic; a claim to treat a skin condition is not.
Secure the heavy-metals report on the finished paste, declare the clay composition, and evidence the preservative system.
🛠️ Step-by-Step Registration Process
- Classify the productConfirm the article meets the definition of a cosmetic under Section 3(aaa) and is not a drug, then map it to the correct Fourth Schedule category — this drives both the fee and the certificate scope.
- Appoint the Authorised Indian AgentExecute the authorisation in the First Schedule format, signed jointly by manufacturer and agent on every page, then notarised and apostilled (Hague states) or attested by the Indian Embassy.
- Assemble the technical dossierIngredient list with percentages, specification and method of testing, finished-product test reports, inner and outer labels, GMP / ISO 22716 evidence and the Free Sale Certificate.
- Align the label to Chapter VIIndian labelling is one of the top rejection reasons. India-specific content may be stickered onto the unit pack at a bonded warehouse before clearance.
- Pay the fee on BharatkoshCompute the category, site and variant fees, pay online under head 0210041040000-00-1 and retain the acknowledgement receipt for upload.
- File Form COS-1 on SUGAMUpload the full checklist, including the correlation chart that ties each product serial number in COS-1 to the Free Sale Certificate and the authorisation.
- Respond to CDSCO queriesQueries typically concern apostille defects, Free Sale Certificate scope mismatch, ingredient limits and label non-compliance. Reply within the stipulated period, as each query restarts the effective clock.
- Receive Form COS-2Print the Registration Certificate number on every unit pack, alongside the holder's name and address, before the goods are cleared for sale.
💰 Government Fees
CDSCO cosmetic registration is priced under the Third Schedule and paid category by category, not as a single flat licence. The headline components are:
Each cosmetic category
USD 1,000 for the grant or retention of the Registration Certificate, per Fourth Schedule category.
Each additional category
USD 1,000 for every further category added to the same application.
Each variant
USD 50 for each shade, fragrance or formulation variant declared.
Each manufacturing site
USD 500 for every overseas manufacturing premises covered.
Fees are paid online through the Bharatkosh gateway under head of account 0210041040000-00-1, and the acknowledgement receipt is uploaded with the application. A duplicate certificate is USD 200, permission for a novel ingredient not previously used in India is USD 500, and inspection of an overseas manufacturing site, if ordered, is a further USD 5,000.
⏱️ Timeline & Validity at a Glance
A complete, well-drafted application is typically cleared in about four to six months. The single biggest lever on that timeline is the quality of the first filing: every query CDSCO raises effectively restarts the clock, so a dossier that pre-empts the common objections is worth far more than one filed quickly and corrected later. The certificate is valid for five years and should be re-registered before expiry — an application filed after lapse is treated as a fresh registration, and a retention fee keeps the certificate alive across the term.
⚠️ Where Clay & Wash-off Masks Applications Get Queried
Most clay-mask queries concern heavy metals and preservation:
- No heavy-metals report on a natural clay/mineral-based mask.
- Preservative system undeclared for a water-based paste.
- A treatment claim that converts the product into a drug.
- Variants under-declared for the USD 50 variant fee.
🔗 Related Approvals Alongside CDSCO
CDSCO registration rarely travels alone. Depending on the product and the importer, plan for these adjacent approvals in parallel, because any one of them can hold a consignment at the port even when the CDSCO certificate is in order:
- Importer-Exporter Code (DGFT) — mandatory for any importer of record, obtained before the first consignment.
- LMPC registration (Legal Metrology) — importers of pre-packaged commodities register under the Legal Metrology (Packaged Commodities) Rules, 2011 and carry MRP, net quantity, importer details, country of origin, consumer-care details and date of import on the pack.
- Wholesale licence (Form 20B / 21B) — where the Indian agent also distributes drugs alongside cosmetics.
- Drug import licence (Form 10) — where the product contains a pharmacologically active ingredient or makes a therapeutic claim, it is a drug, not a cosmetic, and this route replaces COS-1.
✅ Post-Approval Obligations
The certificate is the start of an ongoing compliance duty, not the end of it. After grant, the registration holder must:
- Print the Registration Certificate number on every unit pack, with the name and address of the certificate holder.
- Report any change in labelling, composition, testing or specification within 30 days, with an undertaking of continued compliance with the Ninth Schedule standards.
- Report any market withdrawal, regulatory restriction, cancellation of authorisation or not-of-standard-quality finding in any country where the product is sold, and stop dispatch and marketing immediately.
- Allow the Licensing Authority to draw samples for testing and to inspect the overseas manufacturing premises.
- Track BIS standard revisions — a new or amended Indian Standard becomes mandatory six months after publication.
- Diarise re-registration well before the five-year expiry.
❓ Frequently Asked Questions
Is CDSCO registration mandatory for imported clay and wash-off masks?
Yes. They are Fourth Schedule skin-care preparations and cannot be imported until registered under Rule 12(1) of the Cosmetics Rules, 2020, with the certificate issued in Form COS-2.
Is there an Indian Standard for a clay mask?
No. There is no product-specific Ninth Schedule standard, so the mask is assessed against the country-of-origin specification plus the Cosmetics Rules.
Why is a heavy-metals report important for clay masks?
Because natural clays and mineral pigments can carry trace lead, arsenic and mercury; the finished-mask heavy-metals report shows they are within the general limits.
How is a clay mask different from a sheet mask for registration?
A clay/wash-off mask is registered on the paste itself (no substrate), so the mineral composition and heavy metals matter; a sheet mask is registered on its impregnating essence.
How long does registration take and how long is it valid?
Around four to six months for a complete application; the certificate is valid for five years and must be re-registered before expiry.
Do we need an Authorised Indian Agent?
In practice yes — the agent files on the First Schedule format and carries statutory liability for the product in India.
Clay & Wash-off Masks Import Registration, Handled End to End
Global Approbation manages the complete CDSCO cosmetic registration for imported clay & wash-off masks — classification, standard mapping, CoA and label review, dossier assembly and query response — so your first consignment clears without avoidable delay.
Talk to Our CDSCO Team Global Market Access