WPC · Wireless Approval

WPC ETA Approval for Bluetooth Speakers in India

Bluetooth speakers and soundbars need WPC Equipment Type Approval before import or sale — bands, RF test standards, related approvals, fees and pitfalls.

Published: November 2026 Reading Time: 5 min
WPC ETA approval for Bluetooth Speakers in India — Global Approbation

Portable Bluetooth speakers, party speakers and soundbars all contain a 2.4 GHz radio, so every model sold in India needs a WPC Equipment Type Approval (ETA) before import or sale. This guide covers the bands involved, the RF test standards, the other Indian approvals that usually apply, and the mistakes that most often delay approval. For the full service, see our WPC ETA approval services.

Quick answer: Yes. A Bluetooth speaker transmits in the de-licensed 2.4 GHz band, so it qualifies for ETA through self-declaration on the SARAL Sanchar portal. The fee is Rs 10,000 per application and the ETA remains valid unless revoked.

📡 Do Bluetooth Speakers Need WPC Approval?

Yes. A Bluetooth speaker transmits in the de-licensed 2.4 GHz band, so it qualifies for ETA through self-declaration on the SARAL Sanchar portal. Each model (or family of electrically identical models) needs its own ETA; a soundbar with a wireless subwoofer may also use a 5 GHz link that must be covered.

Rs 10,000ETA Fee
Self-declarationETA Route
LifetimeValidity (unless revoked)

📶 Radio Bands & Technologies

Bluetooth (2.4 GHz)

Classic Bluetooth and Bluetooth Low Energy operate in 2400–2483.5 MHz, a de-licensed band in India. Tested to ETSI EN 300 328.

Wireless subwoofer / surround link

Many soundbars pair the subwoofer over a proprietary 2.4 GHz or 5.8 GHz link. That link is a separate radio and must appear in the RF test report.

Wi-Fi 2.4 GHz

802.11b/g/n/ax in 2400–2483.5 MHz. Tested to ETSI EN 300 328.

🔬 RF Test Standards & Reports

WPC needs an RF test report for every transmitter in the product. Reports are typically prepared against the harmonised ETSI standards below, at an ISO/IEC 17025-accredited lab, with the firmware set to India’s bands and power limits.

🧾 Other Approvals for Bluetooth Speakers

WPC ETA covers only the radio. Depending on the product, these approvals usually run alongside it:

🛠️ Step-by-Step WPC ETA Process

  1. Map every radioList each transmitter in the bluetooth speakers with its band, technology and maximum output power.
  2. Check India settingsConfirm firmware limits channels and power to the Indian de-licensed bands.
  3. RF testingTest each radio to the applicable ETSI standard at an ISO/IEC 17025-accredited lab, or check that existing reports cover the Indian settings.
  4. Register on SARAL SancharCreate the applicant profile (Indian entity or authorised Indian representative, with GST, PAN and IEC details).
  5. File the self-declarationUpload the RF test report, technical documents and authorisation, and pay the Rs 10,000 fee.
  6. Download the ETAUnder DoT’s September 2024 OM, the ETA can be downloaded once the application is successfully submitted.

📄 Documents Required

Model numbers matter: the model numbers in the test report, label, manual and ETA application must match exactly. Mismatches are among the most common reasons for queries and customs holds.

⚠️ Common Pitfalls for Bluetooth Speakers

❓ Frequently Asked Questions

Do I need a new ETA for every colour of the same speaker?

No. Colour and cosmetic variants that are electrically identical can be covered by one ETA, as long as all model numbers are declared.

Is a CE or FCC test report accepted?

Test data to ETSI EN 300 328 is generally used. An FCC-only report may not show results against the Indian band and power limits, so check coverage before filing.

Does a soundbar with Wi-Fi need anything extra?

The Wi-Fi radio (2.4 and/or 5 GHz) must be in the same RF test report and declared in the ETA application.

How much does WPC ETA cost and how long is it valid?

The SARAL Sanchar fee is Rs 10,000 per application, and DoT states that an ETA is valid for life unless revoked by the WPC Wing. Testing costs are separate.

How long does WPC ETA by self-declaration take?

Once the RF test report is ready, the application is filed on SARAL Sanchar and the ETA can be downloaded after successful submission and fee payment. Most of the time goes into testing.

WPC ETA for Bluetooth Speakers — Handled End to End

Global Approbation maps your radios, coordinates RF testing, files on SARAL Sanchar and manages the related BIS and DoT approvals, so your Bluetooth speakers and soundbars can clear customs without delay.

Talk to Our WPC Team WPC ETA Services