
Smart plugs, bulbs, switches, door sensors and hubs connect over Wi-Fi, Bluetooth, Zigbee or Thread/Matter — all in the 2.4 GHz band, plus 433 or 865 MHz for some sensors. Each device model needs WPC ETA, and many also need BIS approval. This guide covers the bands involved, the RF test standards, the other Indian approvals that usually apply, and the mistakes that most often delay approval. For the full service, see our WPC ETA approval services.
Quick answer: Yes. Every smart-home device with a radio needs ETA. The fee is Rs 10,000 per application and the ETA remains valid unless revoked.
📡 Do Smart Plugs, Smart Bulbs & Smart Home Devices Need WPC Approval?
Yes. Every smart-home device with a radio needs ETA. Most use the 2.4 GHz band (Wi-Fi, BLE, Zigbee, Thread) and qualify for self-declaration. Sub-GHz sensors and remotes in 433 MHz or 865–867 MHz must stay within the low-power limits for those bands.
📶 Radio Bands & Technologies
Wi-Fi 2.4 GHz
802.11b/g/n/ax in 2400–2483.5 MHz. Tested to ETSI EN 300 328.
Bluetooth (2.4 GHz)
Classic Bluetooth and Bluetooth Low Energy operate in 2400–2483.5 MHz, a de-licensed band in India. Tested to ETSI EN 300 328.
Zigbee / Thread / Matter
IEEE 802.15.4 radios at 2.4 GHz. Tested to ETSI EN 300 328.
Sub-GHz sensors (433 / 865–867 MHz)
Door sensors, alarm remotes and LoRa devices. Tested to ETSI EN 300 220.
🔬 RF Test Standards & Reports
WPC needs an RF test report for every transmitter in the product. Reports are typically prepared against the harmonised ETSI standards below, at an ISO/IEC 17025-accredited lab, with the firmware set to India’s bands and power limits.
- ETSI EN 300 328 — Wi-Fi, BLE, Zigbee, Thread at 2.4 GHz
- ETSI EN 300 220 — 433 MHz and 865–867 MHz short-range devices
- EN 301 489-1/-3/-17 — EMC (supporting)
🧾 Other Approvals for Smart Plugs, Smart Bulbs & Smart Home Devices
WPC ETA covers only the radio. Depending on the product, these approvals usually run alongside it:
- BIS CRS for LED smart bulbs: Self-ballasted LED lamps are a BIS CRS category (IS 16102 Part 1). A smart bulb needs CRS registration as well as ETA.
- ISI mark for smart plugs: Plugs and socket-outlets fall under the Electrical Accessories Quality Control Order (IS 1293), which requires a BIS ISI licence.
- BIS CRS for hubs and adapters: Hubs with external adapters need the adapter registered under BIS CRS.
🛠️ Step-by-Step WPC ETA Process
- Map every radioList each transmitter in the smart plugs, smart bulbs & smart home devices with its band, technology and maximum output power.
- Check India settingsConfirm firmware limits channels and power to the Indian de-licensed bands.
- RF testingTest each radio to the applicable ETSI standard at an ISO/IEC 17025-accredited lab, or check that existing reports cover the Indian settings.
- Register on SARAL SancharCreate the applicant profile (Indian entity or authorised Indian representative, with GST, PAN and IEC details).
- File the self-declarationUpload the RF test report, technical documents and authorisation, and pay the Rs 10,000 fee.
- Download the ETAUnder DoT’s September 2024 OM, the ETA can be downloaded once the application is successfully submitted.
📄 Documents Required
- RF test report covering every radio in the product
- Technical specifications: frequency bands, technology and maximum output power for each radio
- User manual and product photographs or label artwork showing the model number
- Authorisation from the manufacturer, where an Indian representative applies
- Applicant registration details on SARAL Sanchar (GST, PAN, IEC)
⚠️ Common Pitfalls for Smart Plugs, Smart Bulbs & Smart Home Devices
- One Wi-Fi module used across a whole product range, but each finished product not declared.
- Smart plug approved for WPC but missing the ISI licence for the socket.
- Sub-GHz sensor exceeding the power limit for the 433 MHz band.
- Firmware update adds Thread or Matter radio functions not in the original test report.
❓ Frequently Asked Questions
Do I need one ETA per product type?
Each distinct product (plug, bulb, sensor) needs coverage. Electrically identical variants can be grouped.
Does a Matter-certified device skip WPC?
No. Matter is an interoperability standard; WPC ETA is still required for the radio.
Which BIS scheme applies to a smart plug?
The plug/socket part needs an ISI licence under IS 1293. The radio needs WPC ETA.
How much does WPC ETA cost and how long is it valid?
The SARAL Sanchar fee is Rs 10,000 per application, and DoT states that an ETA is valid for life unless revoked by the WPC Wing. Testing costs are separate.
How long does WPC ETA by self-declaration take?
Once the RF test report is ready, the application is filed on SARAL Sanchar and the ETA can be downloaded after successful submission and fee payment. Most of the time goes into testing.
WPC ETA for Smart Plugs, Smart Bulbs & Smart Home Devices — Handled End to End
Global Approbation maps your radios, coordinates RF testing, files on SARAL Sanchar and manages the related BIS and DoT approvals, so your smart plugs can clear customs without delay.
Talk to Our WPC Team WPC ETA Services