
Radio modules (Wi-Fi, BLE, Zigbee, LoRa, LTE-M) are built into thousands of products. In India, both the module supplier and the manufacturer of the finished product need to understand where WPC ETA sits. This guide covers the bands involved, the RF test standards, the other Indian approvals that usually apply, and the mistakes that most often delay approval. For the full service, see our WPC ETA approval services.
Quick answer: A module sold on its own as a radio product can obtain its own ETA by self-declaration. The fee is Rs 10,000 per application and the ETA remains valid unless revoked.
📡 Do Wi-Fi & Bluetooth Modules Need WPC Approval?
A module sold on its own as a radio product can obtain its own ETA by self-declaration. In practice, WPC approval follows the finished product placed on the market, so an OEM using an approved module usually still files an ETA for its own product. The module test report then does most of the work.
📶 Radio Bands & Technologies
Wi-Fi 2.4 GHz
802.11b/g/n/ax in 2400–2483.5 MHz. Tested to ETSI EN 300 328.
Wi-Fi 5 GHz
802.11a/n/ac/ax in the de-licensed 5 GHz sub-bands. Tested to ETSI EN 301 893 (and EN 300 440 / EN 302 502 where the 5.8 GHz band is used).
Bluetooth (2.4 GHz)
Classic Bluetooth and Bluetooth Low Energy operate in 2400–2483.5 MHz, a de-licensed band in India. Tested to ETSI EN 300 328.
LoRa / sub-GHz
865–867 MHz LoRa and proprietary modules. Tested to ETSI EN 300 220.
LTE-M / NB-IoT
Cellular IoT modules tested to the ETSI EN 301 908 series.
🔬 RF Test Standards & Reports
WPC needs an RF test report for every transmitter in the product. Reports are typically prepared against the harmonised ETSI standards below, at an ISO/IEC 17025-accredited lab, with the firmware set to India’s bands and power limits.
- ETSI EN 300 328 / EN 301 893 — Wi-Fi and Bluetooth
- ETSI EN 300 220 — sub-GHz LoRa/SRD
- ETSI EN 301 908 series — cellular IoT
- Host-product spot checks (radiated power with the final antenna) where the antenna differs from the module reference design
🧾 Other Approvals for Wi-Fi & Bluetooth Modules
WPC ETA covers only the radio. Depending on the product, these approvals usually run alongside it:
- Finished-product approvals: The product the module is built into will have its own BIS, BEE or MTCTE requirements depending on its category.
🛠️ Step-by-Step WPC ETA Process
- Map every radioList each transmitter in the wi-fi & bluetooth modules with its band, technology and maximum output power.
- Check India settingsConfirm firmware limits channels and power to the Indian de-licensed bands.
- RF testingTest each radio to the applicable ETSI standard at an ISO/IEC 17025-accredited lab, or check that existing reports cover the Indian settings.
- Register on SARAL SancharCreate the applicant profile (Indian entity or authorised Indian representative, with GST, PAN and IEC details).
- File the self-declarationUpload the RF test report, technical documents and authorisation, and pay the Rs 10,000 fee.
- Download the ETAUnder DoT’s September 2024 OM, the ETA can be downloaded once the application is successfully submitted.
📄 Documents Required
- RF test report covering every radio in the product
- Technical specifications: frequency bands, technology and maximum output power for each radio
- User manual and product photographs or label artwork showing the model number
- Authorisation from the manufacturer, where an Indian representative applies
- Applicant registration details on SARAL Sanchar (GST, PAN, IEC)
⚠️ Common Pitfalls for Wi-Fi & Bluetooth Modules
- Assuming a module ETA automatically covers every host product.
- Changing the antenna in the host product without re-checking radiated power.
- Module firmware unlocking bands or power levels not allowed in India.
- Module supplier unwilling to share the full RF test report with the OEM.
❓ Frequently Asked Questions
Can I reuse my module supplier’s test report?
Yes, if it covers the bands and power levels used in your product and your antenna matches. You still file the ETA for your own product.
Do development boards need ETA?
Boards sold commercially as radio products are treated like any other product. Prototype or R&D units are handled separately.
How long does a module-based ETA take?
With a complete module report, the self-declaration ETA is filed online and downloaded once the application is submitted and the fee is paid.
How much does WPC ETA cost and how long is it valid?
The SARAL Sanchar fee is Rs 10,000 per application, and DoT states that an ETA is valid for life unless revoked by the WPC Wing. Testing costs are separate.
How long does WPC ETA by self-declaration take?
Once the RF test report is ready, the application is filed on SARAL Sanchar and the ETA can be downloaded after successful submission and fee payment. Most of the time goes into testing.
WPC ETA for Wi-Fi & Bluetooth Modules — Handled End to End
Global Approbation maps your radios, coordinates RF testing, files on SARAL Sanchar and manages the related BIS and DoT approvals, so your Wi-Fi can clear customs without delay.
Talk to Our WPC Team WPC ETA Services